Tile floors are designed to last for many years, but after some time, the tiles and grout can get stained as they are more prone to dust. This makes it essential for every homeowner to clean the floor and wall tiles more often to keep them shiny.
Whether ceramic or porcelain, usual cleaning methods like mopping and vacuuming are not enough for tile and grout cleaning. You need assistance from cleaning-polishing and sealing services in Temple TX for better results. But, the grout and lines of the tiles need regular cleaning as they could look worse once they are stiffed with dirt and molds.
Fortunately, you have multiple options to deal with the bad grouts like professional cleaning-polishing and sealing services in Temple TX and few DIY tricks.
To help you out, we have compiled a list of few DIY methods you can perform for tile grout cleaning, read on!
1.Sweep Daily:
One of the easiest ways to keep your tile and grout clean and shiny is to wipe up spills. Sweep your floor daily with a microfiber dust soap. This would take 10 to 15 minutes but will work for longer. Also, while sweeping the floor daily, you can add vinegar to the water-vinegar help in cleaning harsh dirt and stain from the floor.
Note: You can create the habit of sweeping your floors right after you clean up the dinner dishes- this way, it will become a part of your daily routine.
2.Vacuum Often:
Vacuum cleaning is not only to clean up the carpet but can be turn up to clean the floor tiles also. Vacuuming tile is an easy and simple way to keep the tile free from sand and dirt. Here, you need to ensure that your vacuum has plenty of suction. Cheap and older vacuum cleaners would not remove the dirt from the grout and tiles- they just blow it around. You can vacuum the floor twice a week for better results.
3. Remove The Dirt Before Mopping The Tile:
Mopping the tiles and grout without removing the dirt will double your work and will take you more time. Most of the homeowners make the same mistake of not removing dirt from the grout before mopping, which lets the dirt residue move around.
Here, a vacuum is one of the best cleaners that can remove dirt from the floor into the machine. Moreover, if you don’t want to use a vacuum cleaner, then use a cloth dusting broom to clean the floor.
4.Dry Mop Before A Wet One:
Cleaning your floor with a dry cloth or microfiber mop is one of the best options you can use. Most of the time, your floor does not need a full wet-mop. You can run the dry mop over tiles and remove the dirt and stains.
5.Avoid Bleach & Other Strong Chemicals:
Try to avoid bleach and another harsh chemical on your floors for cleaning- these harsh cleaners only make the tiles and grout more prone to dirt and leads to other damages. The professionals can perfectly use harsh chemicals and cleaners, so if you want to get your tiles and grout polished through harsh cleansers, connect with the cleaning-polishing and sealing services in Temple TX.
6.Dry The Floor:
Most of the time, people do not let their floor dry appropriately after the cleaning, which simply makes it more muddy and clumsy. Therefore, after cleaning tile and grout, run an old white towel over the floor- this removes the dirt and lets you see if the tiles are properly cleaned.
NeilStark is a professional blogger who has been actively creating content since 2012. His engaging writing style and attention to detail have made him a trusted voice in the blogging community, consistently providing valuable information and inspiration to his readers.
